Face detection

    Find the face in a picture, and frame the face, that is, know the position and size of the face

    Use the YOLO V2 model to detect faces


    • Download model: Go to here to download the model file face_model_at_0x300000.kfpkg
    • Use kflash_gui to download the model to Flash, or put it in SD card
    • Load model
    task = kpu.load(0x300000)
    # task = kpu.load("/sd/face.kmodel")
    anchor = (1.889, 2.5245, 2.9465, 3.94056, 3.99987, 5.3658, 5.155437, 6.92275, 6.718375, 9.01025)
    kpu.init_yolo2(task, 0.5, 0.3, 5, anchor)

    Because the model of YOLO V2 is used, it has a dedicated function interface, use init_yolo2 to initialize the model

    The parameters are:

    • kpu_net: kpu network object, that is, the loaded model object, the return value of KPU.load()
    • threshold: Probability threshold, only if the probability of this object is greater than this value will the output result, value range: [0, 1]
    • nms_value: box_iou threshold, in order to prevent the same object from being framed in multiple boxes, when two boxes are framed on the same object, the intersection area of ​​the two boxes accounts for the proportion of the total occupied area of ​​the two boxes. When it is less than this value, take the box with the highest probability
    • anchor_num: the number of anchor points, fixed here as len(anchors)//2
    • anchor: The anchor point parameters are consistent with the model parameters. This parameter of the same model is fixed and bound to the model (it is determined when the model is trained) and cannot be changed to other values.

    Then enter the image data and run the model

    code = kpu.run_yolo2(task, img)

    To get the result, see here for the complete example

    API documentation see Maix.KPU