MaixCube

    Overview

    SIPEED MaixCube can develop programming learning kit, MaixCube integrates 30W camera, expandable TF card slot, user buttons, IPS 1.3 inch display, 200mAh lithium battery, speaker, microphone, SPMOD, GROVE expansion interface, etc. on the hardware.
    MaixCube is equipped with MaixPy by default on the software. Users can easily use MicroPython syntax to quickly get started with AI IoT development, develop face recognition, object recognition and other AI applications. At the same time, it also reserves development and debugging interfaces, which can also be used as a powerful AI learning development board.

    Appearance and function introduction

    Appearance list

    Maix Cube

    Onboard functions

    Project Description
    CPU: Dual-core 64bit RISC-V / 400MHz (double precision FPU integration)
    Memory: 8MiB 64bit on-chip SRAM
    Storage: 16MiB Flash, support micro SDXC expansion storage (max 128GB)
    Screen: 1.3 inch IPS Screen: Resolution 240*240
    Camera: Equipped with 0V7740 30W pixels Sensor
    Buttons: Reset button, power button (short press to turn on, long press 8S to turn off), three-way button
    USB: Type-C interface, positive and negative blind plug
    Audio: Support audio recording, playback, driver IC (ES8374)
    Onboard sensors: Three-axis acceleration sensor (MSA301)
    Lights: Onboard two RGB LEDs, one flashlight
    TF card slot: Multimedia resource expansion, support large-capacity storage
    Power management: AXP173 control unit, 200mAh lithium battery, support user charge and discharge control

    Pin Resources

    Maix Cube

    Onboard expansion interface

    Maix Cube opens two highly expanded interfaces to users: one SP-MOD and one Grove Interface, users can easily DIY

    Onboard I2C device

    MaixCube onboard I2C sensor/IC

    IC Device id I2C address (7-bit address) MaixPy read address Sample code
    ES8374 0x08 0x10 D(16) code
    MSA301 0x13 0x26 D(38) code
    AXP173 0x68 0x34 D(52) code

    Get started

    Because MaixCube comes with its own GUI demo interface and sample programs, you can play with the preset programs first when you get the board.
    After that, we will start to use MaixCube to get started with AIoT with MaixPy.

    Before development, we need to understand and prepare related tools to reduce the pitfalls we have to follow because of insufficient preparation.

    Steps to get started:

    1. Download the required drivers and software
    2. Connect the development board to the computer and install the USB driver
    3. Update the latest firmware
    4. Download and open the latest MaixPy IDE
    5. Connect MaixPy IDE to the development board Run MaixPy sample program

    Software and hardware preparation

    Hardware preparation:

    • Computer one
    • MaixCube Development Board
    • One reliable USB Type-C data cable: pay attention to a reliable data cable

    Software preparation:

    install driver

    When we get the Maix Cube and connect to the computer, we can open the device manager to check whether the serial port driver has been installed. The methods to open the device manager are:

    • This computer (right click) -> Properties -> Device Manager
    • Start menu (right click) -> Device Manager
    • Control Panel -> (Search) Device Manager

    1. When our system is a Win10 system, the system will automatically install the driver for us, and if it is an old version of Win7, win8, we need to install it manually:

    2. Open the link in the previous section to download the driver

    3. Click Install
    4. After the installation is complete, you can see in the device manager that two serial devices have been identified

    Update the firmware to the latest version

    After the user gets the development board, the on-board firmware may not be the latest version by default, so there will be more or less bugs during use.
    We need to update the firmware version to the latest version at this time

    View update method: Update Firmware

    Run the first program Hello World

    • LCD real-time preview Camera (when connecting with MaixPy IDE, select Maixduino)
    import sensor, image, time, lcd
    
    sensor.reset()
    sensor.set_pixformat(sensor.RGB565)
    sensor.set_framesize(sensor.QVGA)
    sensor.skip_frames(time = 2000)
    sensor.set_hmirror(1)
    sensor.set_vflip(1)
    
    clock = time.clock()
    
    lcd.init(type=2)
    lcd.rotation(2)
    
    while(True):
        clock.tick()
        img = sensor.snapshot()
        print(clock.fps())
        img.draw_string(60, lcd.height()-120, "fps:"+str(clock.fps()), lcd.GREEN, scale=2)
        lcd.display(img)
    
    

    Download

    Sipeed-Maix-Cube data download: Sipeed-Maix-Cube

    Sipeed-Maix-Cube specification download: Sipeed-Maix-Cube

    Sipeed-Maix-Cube schematic download: Sipeed-Maix-Cube