Maix Nano USB Driver Installation

    Linux

    Linux does not need to install the driver, the system comes with it, use ls /dev/ttyUSB* to see the device number

    Windows

    The development board uses the CH552 chip to realize the USB to serial port function, and Windows users need to install the FT2232 driver.

    When we get the MaixPy development board and connect it to the computer, we can open the device manager to check whether the serial port driver has been installed. The methods to open the device manager are:

    • This computer (right click) -> Properties -> Device Manager
    • Start menu (right click) -> Device Manager
    • Control Panel -> (Search) Device Manager

    1. When our system is a Windows 10 system, the system will automatically install the driver for us, and if it is an old version of Win7, win8, we need to install the USB driver manually:

    2. Open the link in the previous section to download the driver

    3. Click Install

    4. After the installation is complete, you can see in the device manager that two serial devices have been identified (only one serial port is available)