MaixPy Development History

    Write down the development history of this article, hoping to let future developers know what MaixPy has gone through, what are the reasons for some major changes, and when major progress has been made.

    The code submission history can be seen in the historic and master branches

    September 2018

    The MaixPy project was launched, and the opportunity was the completion of the K210 chip tapeout.

    So everyone wanted to make a set of easy-to-use software kits that allow more people to use AI development in embedded applications. Because of the ease of use of Micropython, and the k210 has 6+2MiB memory, the main frequency is 400MHz, and it is fully capable of controlling Micropython. Micropython is selected as the programming syntax

    Based on the development board Maix dock, the name is now called Lichee Pill, and the QQ group name is also called Lichee Pill Alchemy Group

    xiaohui and wipping started to try to port Micropython

    December 2018

    K210 SDK was replaced from freertos to standalone SDK, and the on-chip peripheral driver adaptation was started

    neucrack, xel and zepan join the project team

    February 2019

    Release the first version of the firmware v0.1.1 beta, support basic peripherals, inherit the image sensor lcd API of openmv, Equipped with some open source tools such as upyloader, armpy, etc., write documents and publish them on maixpy.sipeed.com

    In addition, there are also two new development boards, Maix bit and Maix Go.

    Xiaohui left the project team

    March 2019

    Release the second version of the firmware v0.2.4, adding support for jpeg, wav, kpu, nes, avi, lvgl, etc.

    April 2019

    Adapted to OpenMV IDE, which is MaixPy IDE, based on the original software, only USB communication is changed to serial communication supported by k210, and other functions remain unchanged

    The pre-compiled firmware began to differentiate the function into multiple firmware, mainly considering the problem of insufficient memory in the running model

    wipping left the project team, zepan and xel focused on other project teams

    June 2019

    The project structure was refactored. Previously, the code was directly added to the directory structure of micropython and the code was added to the port directory. However, there would be a problem, that is, updating the micropython program becomes more troublesome, and you need to separate the code added by micropython and MaixPy , And the old code structure is too messy, the Makefile is not very well written, and the build is slow.
    So with the current directory structure, cmake + kconfig is used to build the project, and each component is modularized, and you can choose whether to compile into the firmware. The compilation framework is here. But there are still some remaining problems. There are some legacy codes under the directory that are not fully coupled.

    July 2019

    Added support for M5Stick-V development board, maintained by Martin Han

    December 2019

    Maixhub is online, used for online model training, only need to upload data set without writing code

    Hardware update: online M1N module, golden finger module

    April 2020

    Sugar Lao Duck Join the project team

    May 2020

    Big Rats Join the project team

    June 2020

    Hardware update: Maix Cube development board is online

    July 2020

    Add board-level configuration files for different boards, put them in the file system, and read them after booting. This is mainly because Cube and Amigo add power chips. In order to use them normally, you must first set the power chip when booting.

    Hardware update: Maix Amigo development board is online, with a shell added

    November 2020

    Reorganize the documents, more perfect documents and communities